We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
There is growing interest in using different waste materials for making polymeric composites to shield against electromagnetic interference (EMI).
Study: Flexible and High-Performance Electromagnetic Shielding Materials from Waste Polyurethane Foams. Image Credit: SunnyMeansSixteen/Shutterstock.com
According to a paper published in the journal Industrial & Engineering Chemistry Research, waste polyurethane foam may be used to produce highly effective EMI shielding materials by covering the surface with carbon nanotubes and then hot pressing them.
Electromagnetic interferences are electromagnetic signals released by electrical circuits that disrupt the normal functioning of nearby electrical devices or inflict radiative damage upon living organisms.
The widespread use of gigahertz frequency electronic systems and communications equipment has increased electromagnetic pollution to unprecedented levels. Therefore, developing high-performance EMI shielding materials for various applications is imperative.
Metals like aluminum, silver, copper and their alloys are the typical EMI shielding materials, exhibiting good EMI shielding behavior because of their high electrical conductivities and considerable magnetic losses.
Unfortunately, these traditional EMI shielding materials do not remove or lessen electromagnetic pollution. Virtually all the electromagnetic signals are reflected by the metallic sheets, shielding only the area directly behind these sheets and producing secondary electromagnetic wave pollution.
Several studies have been conducted over the past few years to develop EMI shielding materials based on polymeric materials that function by absorbing electromagnetic waves.
Conductive polymeric composites made from polymeric frameworks and conducting fillers have recently emerged as promising EMI shielding materials, with distinguishing benefits including minimal weight, high flexibility, and excellent capacity for absorbing electromagnetic waves.
Most conductive polymeric composites with separated structures are made by first combining polymeric particles or granules with conductive fillers, followed by hot pressing. In this procedure, the conductive fillers segregate the polymeric particles or granules.
This segregation is not favorable for stress transference, resulting in instability and even collapse of the separated structures.
Instead of the mere physical mixing, loading the conductive filler on a single continuous polymeric skeleton may generate a considerably more stable separated structure.
Polyurethane is an important polymeric material. Polyurethane foams have been extensively utilized in different applications, including seating, mattresses, and car upholsteries, because of their low cost, versatility, and high elasticity.
Vast volumes of waste polyurethane foams are regularly created. They are difficult to recycle and are often discarded in landfill or incinerated, resulting in significant environmental contamination.
The retrieval and high-value usage of waste polyurethane offer significant potential for preserving the environment and sustainable development.
This paper presented an effective EMI shielding material having a skin-core separated structure. Multiwalled carbon nanotubes (MWCNTs) were distributed in an aqueous solution of cellulose nanofibers (CNFs) to accomplish then and then dip-coated upon the surface of the waste polyurethane foam skeleton.
A conductive composite of waste polyurethane foam, MWCNTs and CNFs, having a skin-core microscale structure, was created after hot pressing. The conductive MWCNT/CNF sheet acted as the skin and the nonconductive waste polyurethane foam skeleton functioned as the core.
This study presented a simple technique for producing practical and effective EMI shielding materials from waste polyurethane foam. The unique skin-core segregated structure allowed for an increase in the conductivity of the waste polyurethane foam composite with an increase in MWCNT loading.
A 6.6 wt% MWCNT loading enabled the waste polyurethane foam to achieve maximum electrical conductivity. The composite showed a significant increase in tensile strength and elongation at the break due to the continuous waste polyurethane foam skeleton, which was well preserved following compressive molding.
The EMI shielding effect demonstrated by the waste polyurethane foam composite with 6.6 wt% MWCNT loading was significantly greater than that of most previously reported EMI shielding materials.
The waste polyurethane foam composite displayed adequate flexibility and dependable EMI shielding performance. Even after 1000 cycles of mixing and bending, it maintained a strong EMI shielding effect.
The effective EMI shielding material produced in this work is expected to show great promise in multiple EMI shielding applications, presenting a viable technique for the sustainable use of solid polymeric wastes.
Zhang, J., Wang, Q., Huang, B., Xue, X., Li, M., Zhang, W., & Lu, C. (2022). Flexible and High-Performance Electromagnetic Shielding Materials from Waste Polyurethane Foams. Industrial & Engineering Chemistry Research. Available at: https://pubs.acs.org/doi/10.1021/acs.iecr.2c01940
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Shaheer is a graduate of Aerospace Engineering from the Institute of Space Technology, Islamabad. He has carried out research on a wide range of subjects including Aerospace Instruments and Sensors, Computational Dynamics, Aerospace Structures and Materials, Optimization Techniques, Robotics, and Clean Energy. He has been working as a freelance consultant in Aerospace Engineering for the past year. Technical Writing has always been a strong suit of Shaheer's. He has excelled at whatever he has attempted, from winning accolades on the international stage in match competitions to winning local writing competitions. Shaheer loves cars. From following Formula 1 and reading up on automotive journalism to racing in go-karts himself, his life revolves around cars. He is passionate about his sports and makes sure to always spare time for them. Squash, football, cricket, tennis, and racing are the hobbies he loves to spend his time in.
Please use one of the following formats to cite this article in your essay, paper or report:
Rehan, Shaheer. (2022, September 01). Waste Polyurethane Foam Used to Make Excellent Electromagnetic Shielding Materials. AZoNano. Retrieved on September 02, 2022 from https://www.azonano.com/news.aspx?newsID=39603.
Rehan, Shaheer. "Waste Polyurethane Foam Used to Make Excellent Electromagnetic Shielding Materials". AZoNano. 02 September 2022. <https://www.azonano.com/news.aspx?newsID=39603>.
Rehan, Shaheer. "Waste Polyurethane Foam Used to Make Excellent Electromagnetic Shielding Materials". AZoNano. https://www.azonano.com/news.aspx?newsID=39603. (accessed September 02, 2022).
Rehan, Shaheer. 2022. Waste Polyurethane Foam Used to Make Excellent Electromagnetic Shielding Materials. AZoNano, viewed 02 September 2022, https://www.azonano.com/news.aspx?newsID=39603.
Do you have a review, update or anything you would like to add to this news story?
In this interview, we discuss a nanoparticle ink used to produce low-cost printable perovskite solar cells, helping to catalyze the technology transition toward commercial viable perovskite-based devices.
We speak with researchers behind the latest advancement in graphene hBN research that could boost the development of next-generation electronic and quantum devices.
AZoNano speaks with Dr. Laurene Tetard from the University of Central Florida about her upcoming research into the development of nanotechnology that can detect animal-borne diseases. The hope is that such technology can be used to help rapidly control infected mosquito populations to protect public
The Filmetrics R54 advanced sheet resistance mapping tool for semiconductor and compound semiconductor wafers.
This product profile describes the latest nano-particle analyzer "thesis particle size analyzer" and its key features.
The Filmetrics F40 turns your benchtop microscope into an instrument for measuring thickness and refractive index.
AZoNano.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022